Header Ads

One Minute to Thoroughly Understand the Aspire Breeze 2 Kit

The Aspire Breeze 2 Kit is an AIO Pod Kit from Aspire. The compact shape hides a 1000mAh battery and has the ability to store 2.0/3.0 ml e-juice. The biggest highlight of this device is that it has an airflow control system and is equipped with a dust cover. Many vapers like this design very much, then what about you? If you are interested in it, let us know more about the details of the Aspire Breeze 2



How to change coil for Breeze 2?


1)Pull and remove the drip tip section. 2) Unscrew and pull out the chimney unit. 3) Detach the coil from the airflow control ring and replace it with new one. 4) Screw the chimney unit back to the pod system. 5) Replace the drip tip section.


What kind of charger should I use?


Suggest using a wall adapter with an output of 5V/1A.

Does Breeze 2 support firmware upgrade?


No, it doesn’t support.

How do I know when Breeze 2 is fully charged?


When Breeze 2 is fully charged, the LED light will flash both of blue and orange color 20 times and then remain off.

How long time should I charge Breeze 2?


If using the 5V/1A wall adaptor, you need to charge Breeze 2 for about 3 hours.

What’s the e-liquid capacity of the pod?


The TPD version has 2ml capacity, the regular version has 3ml capacity.


What is the battery capacity of Breeze 2


1000mAh

How do I know the battery level?


When the charge capacity is above 3.8V, the indicator light will be blue and orange. When the charge is between 3.5-3.8V, the light will be blue only. When the charge drop below 3.5V, the light will become orange to remind you it’s time to charge it.

Does the Breeze 2 have an auto-fire function as in the original Breeze when in use?


No, it will only fire when you press the fire button.


How to fill the Breeze 2 with e liquid ?


1. Squeeze the pod release buttons on each side of the device to release and remove the pod
2. Invert the pod and lift the silicone seal.
3. Place the filling bottle/dropper into the pod filling hole.
4. Squeeze the bottle/dropper bulb to add your e juice into pod system
5. Replace the silicone seal firmly
6. Re-insert the pod into the power unit and push down firmly until it “clicks” into place.

No comments

Powered by Blogger.