Header Ads

How to use iStick 50W

How to use iStick 50W

Press the rectangle button for five times to turn on the battery, and then long press it to get a puff. Loosen the button to stop puff.

Switch the VV/VW mode: Press the rectangle button for three times to switch the VV/VW mode when the battery is on. In VV mode, you can adjust output voltage between 2.0V-10.0V. In VW mode, you can adjust output wattage between 5W-50W.

Adjust the voltage/wattage: Press the up-and-down arrow buttons to increase or decrease the voltage/wattage.Keep pressingthe up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constantly high speed.The number will stop increasing/decreasing when you loosen the up/down arrow button.


Eleaf iStick 50W

Temperature Alarm: If the temperature of device is over 70℃, the output will shut off automatically and the screen will reflect “Temp Protection” for 5 seconds. After that, the screen will back to normal and then you can continue vaping.

Arrow button lock functionality: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.

Switch the display mode: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.

How to charge 

Eleaf iStick 50W Battery Mod is charged through USB port on the side of battery. It will take 5 hours to fully charge the battery via 1A wall adaptor.

The battery level indicator on the OLED screen will keep flashing during charging. When fully charged, the indicator will stop flashing and keep shining for 10 seconds then go out.

No comments

Powered by Blogger.