Header Ads

How to Use iJust Start ?

Product Introduction 
Inheriting the simple design of iJust series e-cigarette kits, the new iJust start mainly features its direct output voltage, side charging port and adjustable air inflow. In addition to two specifications for you to choose from: 1300mAh for iJust start and 1600mAh for iJust start Plus, the iJust start also comes with various attractive colors for your options.


Quick Start 
1) Assembling: 
1.First screw the atomizer head onto the atomizer base tightly;
2.Then put together atomizer base, atomizer tube and mouthpiece;
3.Finally screw the GS Air 2 atomizer onto the iJust start battery.

2) E-liquid Filling: 
1.First unscrew the atomizer base off the atomizer;
2.Then slowly fill the e-liquid into the atomizer along the tube;
3.Finally screw the atomizer base onto the atomizer again.
Note:
a) Please don’t overfill and make sure the liquid level is between 10%-90%;
b) Please first drip a few drops of e-liquid directly into the wick so as to make the atomizer head fully saturated before vaping.

3) Air Inflow Adjustment: 
The amount of air inflow can be easily adjusted by rotating the silicone airflow control ring so as to get different vaping experiences.

4) Power on/off: 
Press the button five times in quick succession within two seconds, the white button light will flash five times to show the device is ready for use. In the same way, the device can also be turned off.

5) Vaping: Long press the button of Eleaf iJust Start Starter Kit to take a puff.

6) Charging: 
Charge the device by connecting it with wall adapter or computer via the USB cable. The button light will turn red when the device is charging and the light will go out when fully charged.

For the iJust start (1300mAh), it will take about 3 hours to get a full charge via 1A wall adapter. For the iJust start Plus (1600mAh), it will take about 4 hours to get a full charge via 1A wall adapter.

No comments

Powered by Blogger.