Header Ads

Eleaf iCare 140 User Manual

a) How to assemble:
Screw the IC 1.1ohm Head onto the top cap tightly and then screw the top cap with atomizer head into the tank.
b) How to fill e-liquid:
1. First unscrew the top cap off the tank;
2. Then slowly refill the e-liquid into the tank;
3. Finally screw the top cap with atomizer head into the tank again.

Note:
1. Please don’t fill beyond the Max mark to avoid overflow.
2. Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.

Eleaf iCare 140

c) How to Power on/off:
Press the button 5 times in quick succession within 1.5 seconds, the white button light will flash 3 times to show the iCare 140 is ready to use. In the same way, the iCare 140 can also be turned off.

d) How to vaping: When the device is powered on, long press the button to take a puff.

e) How to charge: Charge the Eleaf iCare 140 Starter Kit by connecting it with 0.5A wall adapter or computer via USB cable. The white button light turns on when the device is charging. When the device is fully charged, the light flashes 20 times and then goes out.

No comments

Powered by Blogger.